12Cr2Mo1R (H steel plate: Pro hydrogen 2.25Cr-1Mo-0.25V steel plate).
12Cr2Mo1R(H) material is a hydrogen container plate, "R" represents the first capital letter of the container plate, and H is a hydrogen container. 12 is a chemical element,
XAR400 steel hardness (in room temperature): 360 to 440HB
The Brinell hardness is determined according to the ISO6506 standard. Hardness should be measured approximately 1 mm below the surface.
45# steel is a medium carbon structural steel with good hot and cold workability, good mechanical properties, low price and wide source. Its biggest weakness is the low hardenability, large cross-section size and relatively high requirements of the workpi
XAR500 steel is a special structural steel plate, which has extremely high wear resistance. Generally speaking, the higher the hardness, the higher the wear resistance of the corresponding steel plate. Excellent martensite or martensite-bainite structure.
Q345D alloy plate is delivered in hot rolled, controlled tie, normalized, normalized + tempered, and thermo mechanical rolled (TMCP) states. This steel is a low-alloy steel plate, and the execution standard is GB / T1591-2008 Low-alloy high-strength struc
Q390B is a low alloy high strength steel plate. Q390B steel plates have Z-direction performance.
Z-direction steel other names: Lamellar tear-resistant steel. Definition: Specifically refers to thick or extra-thick steel plates used in offshore oil plat
Boiler plate Q345R steel is widely used in petroleum, chemical industry, power station, boiler and other industries. Gas cylinders, high-pressure water pipes of hydropower stations, turbine turbines and other equipment and components.
Cortent steel, that is, atmospheric corrosion-resistant steel, is a series of low-alloy steels between ordinary steel and stainless steel. Corten steel is made of ordinary carbon steel with a small amount of corrosion-resistant elements such as copper and
Tensile Requirements for for ASTM A387 Class 1 and Class 2 Boiler Plate
Technical requirements of ASTM A387 Class 1 steel and ASTM A387 Class 2 plate are listed in ASTM A387 alloy steel standard. Our produced A387 Class 1 plates and A387 Class 2 sheets
Bb2019!
EN 10028-2 steel flat chemical compostion
EN 10028-2 steel flat is a weldable non-alloy and alloy steel with elevated temperature properties. We can supply EN 10028-2 steel flats, EN 10028-2 steel plates, EN 10028-2 hot rolled sheets with high
XAR500 steel hardness (indoor temperature): 450 ~ 530HB. Brinell hardness shall be determined according to ISO6506. Hardness should be measured approximately 1 mm below the surface. XAR500 material is a German steel grade ispecial structural steel grade.
Heat treatment is an extremely effective measure to improve and improve the performance of 15CrMo alloy steel, and it plays a very important role in product reliability and economy. The heat treatment of 15CrMo alloy steel usually includes two types: ordi
15CrMo steel is a pearlite-structured heat-resistant steel that has high thermal strength (δb≥440MPa) and oxidation resistance at high temperatures, and has a certain resistance to hydrogen corrosion. Because steel contains a higher conte
SAE1045 Vs 45# carbon steel: In terms of carbon content, the 45# carbon steel weight is 0.01% less carbon than the minimum value of the ASAE1045 carbon steel. Howdver, in terms of manganese content, the American Standard contains 0.1% higher manganese con
S700MC/1.8974 hot rolled plate is a high yield structural steel grade produced in compliance with EN 10025:6:2004. S700 MC structural steel Plate is available in widths up to 3350 mm and lengths up to 14630 mm.
S500MC high yield strength steel is a hot rolled automobile strucutal steel. Its material number is 1.0984. S500MC steel sheets are widely used in wheel, beam, carriage, axle, drive shaft, chassis, suspension and other important parts.