ASME SA299 material is a manganese-silicon carbon steel plate for use in welder boilers and other pressure vessels. ASME SA299 pressure vessel plates under this specification are produced in two grades: SA299 Gr.A
and SA299 Gr.B. ASME SA299 is widely used for manufacturing pressure and boiler equipments. Plates of this standard under this thickness of 50 mm are normally supplied in as-rolled condition. Plates may be ordered normalized or stress relieved, or both. Plates over 50 mm in thickness shall be normalized.
ASME SA299 Steel Chemical Requirements
||The Composition (by weight, heat analysis, %)
Carbon Equivalent: Ceq = 【C+Mn/6+(Cr+Mo+V)/5+(Ni+Cu)/15】%
ASME SA299 Steel Mechanical Property
|Yield strength Min. Mpa[ksi]
||Yield strength Min. Mpa[ksi]
||Elongation in 8 in.
||Elongation in 2 in.
| thickness ≦25mm
ASME SA299 plates 2 inch [50mm] and under in thickness are normally supplied in the as-rolled condition. Plates may be ordered normalized or stress relieved, or both. ASME SA299 steel plates products over 2 inch [50mm] in thickness shall be normalized.
Chemical composition test, additional tension test, Charpy V-Notch Impact Test, Drop Weight Test, High- Temperature Tension Test, Ultrasonic Examination, Magnetic particle examination, size and dimension examination
Shanghai Katalor Enterprise is a ASME SA299 carbon steels supplier in China, supplying SA299 Grade A steel and SA299 Grade B steel
plates with various sizes and shapes. If you need ASME SA299 pressure vessel plates, ASME SA299 carbon steel plates, welcome to send your requirement to us [email protected]
. We sincerely invite you to visit factory.