Abrex 400 wear plate properties

Abrex 400 steel is abrasion resistant steel or wear resistant steel plate (wear plate). Abrasion resistant steel is used in areas where there is likely to be a high degree of abrasion or wear of the steel plate. Typical applications are in truck beds, att

What is the Q690ZTE steel?

Q690ZTE steel for offshore platform description
Grade: Q690ZTE
Category: low alloy steel
Executive standard: GB/T 31945-2015 steel plate for jack-up platform legs
Delivery status: quenching and tempering
Application: steel for ships and marine engin

P245NB equivalent steel sheet and strip

The non-alloy quality steel P245NB under EN 10120:2008 standard is steel sheet and strip for welded gas cylinders. BBN steel can supply P245NB sheet and strip up to thicknesses of 5 mm. The steel is weldable by the usual arc welding methods.

NM500 AR steel abrasion resistant plates

NM500 steel is an abrasion resistant plate (AR steel plate) with a hardness of 500 HBW. It is intended for applications where demands are imposed on abrasion resistance in combination with good cold bending properties. NM500 AR steel plate offers very goo

A387 Gr11 CL2 Cr-Mo alloy steel what are the properties?

A387 Gr11 CL2 chromium-molybdenum alloy steel plate has the ability to prevent hydrogen embrittlement, hydrogen corrosion, hydrogen peeling, and sulfide corrosion in a medium temperature (350 ~ 480 ℃) hydrogen environment. At the same time, it has good lo

A517 Grade B low alloy steel for pressure vessels

Like other low carbon steels ASTM A36 A572, A517 low alloy steel has outstanding tensile and yield properties across a broad operating temperature range. Nominal values for A517 B plates are earmarked at around 928 MPa tensile and 687 MPa yield strengths

A285 GrC steel equivalent

A285 GrC material is a medium and low-strength carbon steel plate for pressure vessels. It is mainly used to make fixed boilers, hull boilers and other important boiler accessories.
A285 GrC steel equivalentEN 10028-2 P235GH, DIN 17155

Supply hot rolled Q345B steel coil

Hot rolled Q345B steel coils are widely used in bridges, vehicles, ships, buildings, pressure vessels, etc. Supply hot rolled Q345B steel coil with competitive price.

Q345B low alloy tower used T-shaped steel

Q345B low-alloy T-shaped steel is widely used in various building structures and engineering structures, such as building beams, bridges, power transmission towers, lifting and transporting machinery, ships, industrial furnaces, reaction towers, container

A516 Gr.70 steel quenching purpose

The purpose of quenching is to transform the supercooled austenite into martensite or bainite to obtain a martensite or bainite structure, and then use tempering at different temperatures to greatly increase the strength, hardness, and wear resistance of

A516 Gr.70 steel workpiece quenching and tempering

The A516 Gr.70 steel workpiece has the following characteristics after quenching:
1. Unbalanced (ie unstable) structures such as martensite, bainite, and retained austenite are obtained.
2. There is a large internal stress.
3. The mechanical properties

StE355 steel coils for automobiles

DIN 17102 StE355 steel is a hot rolled products in the form of flats, plate, coils, and wide flats, sections and round bars of weldable fine grain structural steels. We are committed to exceed customer's expectation on the basis of StE355 steel coils pri

Q370qC, Q370qD, Q370qE structural steel supplier

Steel Grades Q370qC, Q370qD, and Q370qE are structural steel plates for bridges. It is required to have high strength, toughness and bear the load and impact of rolling stock, and have good fatigue resistance, certain low temperature toughness and atmosph

What is the application of Q890D material?

Q890D material is a quenched and tempered steel plate for high-strength structure. In the grade, "Q" means yield, "890" means yield value, and "D" means grade. It is similar to the material S890Q. EN 10025-6 S890Q steel is a high strength, and tough

Wear-resistant steel AR400 plates stock in Katalor Industry

AR400 wear-resistant steel plates inventory Category Grade Size(mm) Pieces Weight(tons) Origin Wear-resistant steel AR400 10*2150*10000 1 1.688 Shanghai Wear-resistant steel

What are the properties of A387 Gr5 CL2 plate

A387 Gr5 CL2 plate is suitable for welding chromium-molybdenum alloy steel plates for boilers and high-temperature pressure vessels.
This steel is currently the most widely used heat-strength steel and hydrogen-resistant steel in the world. Due to the ad